VAULT · by Ussa Design
Stack your VAULT
Pick a width and depth, then stack drawers and lidded boxes the way you want them. Click a drawer to open it.
Loading VAULT…
Width
The bottom layer sets the width. On an L you can stack two S side by side; on an XL, an S and an M.
Depth, in 42 mm squares
Layers, top first
Roof
Drawer insides
Bay bins sit on a Gridfinity baseplate, in 2F drawers and taller; a 1F drawer takes the baseplate alone.
Lidded box insides
Base, or on the wall
Handle
Pegboard
Backbones
Connectors
The wheels go at the back, the foot under the front. A handle and pegboard panels bolt to backbones across the back, or to Ussa’s universal ones, a short one at each side; the panels take IKEA Skadis or Ussa’s pegboard hooks. Connectors bolt each joint’s back corners together. On the wall, every module has a plate on its back that hangs on a cleat screwed to the wall.
Finishing
Body color
Front color
What it takes
VAULT goes on sale here once our license is confirmed. Every module is printed to order.
Click a drawer to pull it out, or a lidded box to open its lid. Drag to turn the stack; pinch or scroll to zoom. On a phone, swipe sideways to turn it and up or down to scroll. Sizes shows the stack’s outside measurements. The mug beside it is an ordinary 12 oz coffee mug, there for scale. The link in your address bar opens this build again.
VAULT is designed by Ussa Design; Bench Brass will print it under Ussa’s commercial license. The 3D models are simplified, for display only, with the locks, runners and hinges left out. The knobs and latches shown are stand-ins.